(Click on Above Photo For More Information)

Shipping:

    To properly ship your transmission  by truck. Start with a pallet longer and wider than the transmission it self, then place a 2x4 on each side of the transmission,  to prevent it from sliding around. Then bolt a 24"x24" peace of ply-wood threw the bottom two bell housing bolt holes. Then screw it to another 2x4 on the inside of the ply wood. (Its best to place the plywood against the bell housing  then place your long 2x4 on the inside of the plywood. Remove the plywood and screw it to the pallet Put the Plywood against the bell housing mark the bottem two holes with a center punch. Remove the plywood and drill the two holes with a 1/2 drill bit). Then use a ratchet strap or metal strap around the middle of the transmission securing it to the pallet to keep it from flopping around during shipping. As seen in two pictures below  (click thumbnail to enlarge)

Fed Ex Frieght	R+L Carriers
Over seas and Air freight.

Rossler Transmission's Hours

Monday-Wednesday-Thursday- 8:00am to 4:30 pm  (EST..) 

Tuesday - 8:00 am to 6:00pm ,Friday -8:00 am to 3:00 pm  (EST..)

Phone: (330) 530-5000                     Fax: (330) 530-5400

Please call the shop with all questions about Ross-lock^tm Products and Transmissions.

 Any Questions about Confguring or Inquiry's will not be replied to. Send only Photos or Results To Rosslerweb@aol.com  Copyright © 2009 Rossler Transmissions Inc. All Rights Reserved  

Last modified: 03/03/10